Every service page lists what is included, what is excluded, and what moves the price. If you are not sure which service fits the wall in front of you, call — describing the damage over the phone is usually enough to point you to the right page, and the FAQ covers the questions everyone asks.

Repair & patch
Holes, cracks, nail pops, and bent corner bead. We tape the patch and feather the mud so the edge doesn’t read after paint.

Hang sheetrock
New board on ready framing for additions, basements, and gutted rooms, then tape and mud to the finish named on the estimate.

Tape & finish
Tape set in joint compound (mud), then coats and sanding. Level 4 is the usual wall under flat paint. Level 5 adds a skim coat over the whole wall so seams don’t show under dark paint, gloss, or side light.

Water damage
After the leak is fixed and the cavity is dry, we cut soft board back to the framing, hang new, and tape the patch.

Texture & skim
Match orange peel or knockdown, skim a wall smooth, or scrape popcorn and skim the ceiling. We don’t test or remove asbestos.

Plaster repair
Cracks and loose plaster on wood lath, repaired as plaster.

Commercial
Offices and small tenant spaces. Days on site are written in the scope.
Level 4 or Level 5
Level 4 starts with paper tape embedded in joint compound (mud). We add two more coats on flat joints, coat inside corners, and give screw heads and corner bead three coats, then sand. Corner bead is the metal or paper-faced strip on outside corners. The field of the board—the paper between joints—is not coated. This is the usual finish under flat paint.
Level 5 includes all the Level 4 work plus a skim coat: a thin layer of joint compound over the entire wall or ceiling, then sanding. It evens out the paper and joints so seams and screw heads are less likely to show through dark paint, paint with sheen (eggshell, satin, or semi-gloss), or side light from a window. It does not mean thicker mud on the joints, and it does not straighten wavy studs. We leave it smooth and ready for primer. Primer and paint are the painter’s job.